Automatic barrier is a modern device applied in security management at locations. Many people when buy automatic barrier about and not knowing automatic barrier installation process. Let's learn about it through this article!

Automatic Barrier Installation

Step 1: Determine the location to install and make the base of the automatic barrier:

You can choose to install the barrier directly on an existing concrete slab or pour a new base, depending on the specific site conditions.

• Pour new concrete on top of the old concrete slab, approximately 30-50 cm thick.
• Important Note: Before pouring concrete, remember to pre-set the anchor bolts.
• After 2-3 days (once the new concrete has hardened and dried), you can begin the automatic barrier installation process.

Step 2: Connect Wires from the Power Source to Remote Signals s

• Begin wiring the power source to the automatic barrier's circuit board.
• Set the frequency for the chosen remote controls.
• Attach the barrier arm to the barrier body.
• If your barrier arm is longer than 4m, you'll need to install a head support stand; otherwise, you can skip this step.
• Adjust the springs and other components to align with the control circuit.

Step 3: Recheck the Controller and Begin Automatic Barrier Test Operation

Automatic Barrier

This is a crucial and indispensable step before concluding the installation process. You need to thoroughly recheck everything that has been installed to ensure no errors occur. 

• Turn on the power.
• Run a trial operation.
• Check the controller.
• Manually adjust the arm (if needed).
• Tighten all bolts and other components.

Have You Heard About STS Technology Solution Co., Ltd.'s Barrier Installation Service?

STS Technology Solutions Company Limited We are located at No. 2, Hong Ha, Ward 2, Tan Binh District, Ho Chi Minh City. STS specializes in providing modern, quality equipment specializing in access control, which is performed in a strict order and regulations, including:

• Step 1: Receive customer requests.
• Step 2: Provide a quote based on customer requirements.
• Step 3: Proceed with contract signing.
• Step 4: Implement the contract.
• Step 5: Prepare the Handover and Acceptance Minutes.
  
  Through this article, you must have clearly understood the process. Automatic barrier installation right. Above all, STS will be your top choice when installing Automatic Barrier. Please contact us immediately for advice and enthusiastic answers! If you have any questions, please contact the company's Sales Department via email: sales@stsolution.vn.