EASY SYSTEM CONTROL
The system can be flexibly operated in multiple ways, suitable for everything from residential homes and pedestrian zones to industrial parks and warehouses. Depending on your needs, you can choose remote control, phone-based (GSM) operation, or integrate card-based access control to enhance safety and automation.
KEY HIGHLIGHTS OF THE SYSTEM
- High-security variant: J275 2K20 performance certified according to PAS 68 & IWA 14-1; available in a configuration rated to stop a 7,500 kg truck at ~48 km/h.
Optimized raising/lowering speed: can be configured with rapid lowering for situations requiring urgent traffic clearance or increased throughput during peak hours.
DESIGNED FOR HIGH TRAFFIC & SECURITY
FAAC J275 is an “urban” automatic bollard designed for access points with high vehicle traffic and requirements for continuous operation, such as commercial areas, factories, warehouses, city centers, or restricted-vehicle roads.
Optional stroke of 600 mm or 800 mm: flexible to meet control requirements and the desired level of “barrier” effect.
SELECT ACCORDING TO YOUR NEEDS
J275 HA (Automatic)
Suitable for areas with high vehicle traffic, such as shopping centers and industrial zones…
Designed for continuous use without affecting product quality.
J275 SA (Semi-Automatic)
This solution effectively manages parking issues without requiring an electrical connection.
It's well-suited for city center locations where electrical wiring might be challenging.
J275 F (Fixed)
The equipment is easy to install and requires minimal excavation at the installation site.
It can be permanently installed at a fixed location to restrict vehicles, or installed in combination with automatic and semi-automatic bollards to reinforce the system.
DETAILED PRODUCT SPECIFICATIONS
- J275 HA H600
- J275 SA H600
- J275 F H600
Technical Specifications |
J275 HA H600 |
J275 HA H600 INOX |
| Drive mechanism | Hydraulic power unit | Hydraulic power unit |
| Bollard height above ground [mm] | 600 | 600 |
| Bollard diameter [mm] | 275 | 275 |
| Bollard body material | Steel SJ235JRG2 EN 10277 (6mm thick) | AISI 316L stainless steel, satin finish (6 mm thick) |
| Bollard surface finish | Polyester powder coating + cataphoresis treatment | Satin finish |
| Bollard head cover | Painted Aluminum casing RAL 9006 | Painted Aluminum casing RAL 9006 |
| Raising time [s] | ~5 | ~5 |
| Lowering time [s] | ~7 | ~7 |
| Automatic emergency lowering | Yes (optional) | Yes (optional) |
| Safety switch | Yes (optional) | Yes (optional) |
| Manual emergency lowering | Yes (optional) | Yes (optional) |
| Power supply | 230V ~ 50(60Hz) | 230V ~ 50(60Hz) |
| Maximum power consumption [W] | 575 | 575 |
| Hydraulic unit protection rating | IP67 | IP67 |
| Recommended duty level | High intensity | High intensity |
| Reflective band height [mm] | 25 | 25 |
| Reflective band color | Orange | Orange |
| Total weight [kg] | 112 | 112 |
| Operating temperature | -15 °C / +55 °C | -15 °C / +55 °C |
| Operating temperature with heater (accessory) | -25 °C / +55 °C | -25 °C / +55 °C |
| Underground housing dimensions (R × W × H) [mm] | 560 x 560 x 950 | 560 x 560 x 950 |
| Required excavation pit dimensions (L × W × H) [mm] | 1000 x 1000 x 1250 | 1000 x 1000 x 1250 |
| Power cable | 16+1 cores – minimum cross-sectional area 1.5 mm² (not included) | 16+1 cores – minimum cross-sectional area 1.5 mm² (not included) |
| Maximum cable length [m] | 50 | 50 |
Technical Specifications |
J275 SA H600 |
J275 SA H600 INOX |
| Drive mechanism | Single-acting gas spring | Single-acting gas spring |
| Bollard height above ground [mm] | 600 | 600 |
| Bollard diameter [mm] | 275 | 275 |
| Bollard body material | Steel SJ235JRG2 EN 10277 (6mm thick) | AISI 316L stainless steel, satin finish (6 mm thick) |
| Bollard surface finish | Polyester powder coating + cataphoresis treatment, metallic dark gray RAL 7021 | Satin finish |
| Bollard head cover | Painted Aluminum casing RAL 9006 | Painted Aluminum casing RAL 9006 |
| Unlocking mechanism | Key-operated unlocking (included) | Key-operated unlocking (included) |
| Reflective band height [mm] | 25 | 25 |
| Reflective band color | Orange | Orange |
| Total weight [kg] | 70 | 70 |
| Underground housing dimensions (R × W × H) [mm] | 560 x 560 x 950 | 560 x 560 x 950 |
| Required excavation pit dimensions (L × W × H) [mm] | 1000 x 1000 x 1250 | 1000 x 1000 x 1250 |
Technical Specifications |
J275 F H600 |
J275 F H600 INOX |
| Bollard height above ground [mm] | 600 | 600 |
| Bollard diameter [mm] | 275 | 275 |
| Bollard body material | Steel SJ235JRG2 EN 10277 (6mm thick) | AISI 316L stainless steel, satin finish (6 mm thick) |
| Bollard surface finish | Polyester powder coating + cataphoresis treatment, metallic dark gray RAL 7021 | Satin finish |
| Bollard head cover | Painted Aluminum casing RAL 9006 | Painted Aluminum casing RAL 9006 |
| Reflective band height [mm] | 25 | 25 |
| Reflective band color | Orange | Orange |
| Total weight [kg] | 34 | 34 |
| Underground housing dimensions (R × W × H) [mm] | ||
| Required excavation pit dimensions (L × W × H) [mm] | 750 x 750 x 150 | 750 x 750 x 150 |
OTHER TRAFFIC BOLLARD PRODUCT SERIES
J200
FAAC J200 is a compact automatic bollard designed to control vehicle access in areas that require high aesthetics, such as residential areas, villas, internal parking lots, and branch roads.
- Compact Ø200 design: suitable for installation in residential areas, narrow sidewalks, and internal gates while preserving aesthetics.
- Stable automatic operation: the raising/lowering mechanism is suitable for “light” vehicle control needs, helping to restrict unauthorized vehicles from entering private areas.
JS48/JS80
The FAAC JS48 / JS80 series are high-security bollards designed for perimeter protection and vehicle ramming resistance, while still maintaining aesthetics for urban environments and sensitive areas.
- International crash test certifications according to common standards: PAS 68, IWA 14-1, ASTM F2656.
- The bollard body is made of high-strength steel and features replaceable protective cladding.
- Easy maintenance: key components can be accessed from the top for inspection and replacement.
